ULM 412 H

Construction telescopic handlers

Max. capacity.	1250 kg
Max. lifting height.	4.30 m
Maximum offset	2.62 m
Maximum offset height.	1 m
Bucket pullout force	1880 daN
Transportable weight (min./max.)	2550 kg / 2750 kg
Ground clearance	0.29 m
Wheelbase	2.13 m
Overall length at the apron (with tow hook)	3.47 m
Overall length at the apron (without tow hook)	3.47 m
Overall width	1.49 m
Overall cabin width	0.66 m
Overall height	1.92 m
Dump angle	116 °
Cavage angle	23 °
Turning radius (outer wheels)	2.62 m
Standard tires	CAMSO - MPT 552 - 10.0/75-15.3 124A8
Lifting	8.80 s
Descent	7 s
Telescope output	6.40 s
Telescope return	4.30 s
Caving	3.40 s
Spill	2.60 s
Engine brand	Yanmar
Engine standard	Stage V, Tier 4 final
Engine model	3TNV88C-DMU
Number of cylinders - Displacement	3 - 1,642 cm³
Engine power (hp/kW)	35.10 hp / 26.20 kW
Max. torque / Engine speed	105 Nm @1950 rpm
Tensile stress under load	2000 daN
Automatic radiator cleaning system	Option
Cooling system	3 radiators (water + hydraulic oil + fuel)
Transmission type	Hydrostatics
Number of speeds (forward/reverse)	2 / 2
Maximum travel speed (may vary depending on applicable regulations)	25 km/h
Differential lock	Limited-slip differential on front and rear axles
Parking brake	Automatic negative parking brake
Service brake	Power-assisted hydraulic brake
Hydraulic pump type	Gear pump
Hydraulic flow - Hydraulic pressure	48 l/min - 235 bar
Flow sharing dispenser"	Standard
Hydraulic tank capacity	39 l
Fuel	35 l
Noise at the driver's seat (LpA) tested according to standard NF EN 12053	76 dB
Environmental noise (LwA)	104 dB
Vibration in the hands/arms	< 2.50 m/s²
Cabin certification	ROPS - FOPS Level 1 cab
Orders	JSM